Home
Precor Leg Press/Calf Extension C010ES

Precor Leg Press/Calf Extension C010ES

SKU 814

The Vitality Series Leg Press/Calf Extension allows users to mimic the squat motion or get a full calf extension with a wide, vertical foot pad.

Details

The Vitality Series Leg Press/Calf Extension allows users to mimic the squat motion or get a full calf extension with a wide, vertical foot pad. The non-slip, rubber material of the foot pad, adjustable ratchet seat back, and easy add-on weight lever allow for a variety of users of all sizes.

Features

General Features	Walk-through design. Articulating foot pad stays vertical to mimic a squat movement. Weight Stack 295 lbs (135 kg) with 7.5 lb add-on system.
Instructional Placard	Simple step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximize workouts.
Adjustments	Back pad adjustment features custom-molded sleeve-tube inserts inside attractive oval-shaped steel tubing. Ensures stable, low-friction seat adjustments. Viewing hole and etched numbers on sleeve-tube for accurate positioning of seat and back pad. Hardened plunger and spring-loaded snap-pin assembly position adjustment with easy-grip pull-pin for smooth adjustment. Pull-pin is yellow color-coded for easy identification. Slip-resistant rubber grip handle assembly with machine alloy end-cap. Push grips are over-sized to 1.5 inch (39 mm) diameter. Pull grips and handlebars are 1.25 inch (32 mm) diameter.
Weight Stack	Weight plates are 1 inch (25 mm) thick, machined cast weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizes, with fitted nylon bushings to ensure smooth travel on guide rods. Top weight plate is machined cast weight plate designed for a 10 lb (5 kg) starting weight (25 lbs / 11 kg on the Leg Press). Precision, lubricated bushings for smooth operation. The magnetic weight selection pin assures positive locking to plates and is secured to weight stack with a thick plastic-coated tether cable. Weight selection pin is color-coded for easy identification. Guide rods are 3/4 inch (19 mm) diameter steel, polished with corrosion-resistant plating for smooth operation and rust prevention. Cables are military spec 5 mm cable (Leg Press: 6.3 mm) coated. Custom end fittings tested to 250,000 cycles under a 4440 lb (200 kg) load. Six machines require no removal of pulleys to route cable. For the other 7 machines all pulleys are pre-assembled, so removal, routing and replacing the pulleys is easy - no hunting for the right pulleys, pulley cover and pulley-mounting hardware. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position. Full-length translucent shrouds enclose the back of the weight stack. Front shroud is full-length with a 3 inch (75 mm) wide slot for access to the weight selection pin. Slotted front shroud meets ASTM and EN0957 safety standards.
Frame and Finish	11 gauge (2.75 mm) 2x4-inch (50 x 100 mm) tubing is bent electroweld steel. Finish is electrostatically applied, heat-cured powder coat for superior durability. Frame available in Experience Titanium (metallic industry silver).
Upholstery	Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Construction features a 4-piece design with a 3/4 inch thick plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam core and industrial fabric cover. Total thickness is 2.5 inches (65 mm).
Pulleys and Cables	Glass-fiber-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation.
Bearings and Pivot Points	ABEC-rated bearings for added durability and smooth feel. Size 4 1/2 inch (11 mm). Axles are 25 mm (1 inch) solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement. Pillow block ABEC-grade rotary bearings with grease certs on machines with a cam assembly (Bicep Curl, Tricep Extension, Leg Extension, Leg Curl, Abdominal and Back Extension).
Water Bottle and Accessories Holder	Top cap secures the front and back shrouds and includes an accessories shelf and 4 inch (102 mm) diameter water bottle holder.
Rubber Feet	Yes

Specifications

Weight Stack	295 lbs / 135 kg
Add-on Weight Stack (lbs / kg)	5 lbs / 2.5 kg
Workout Area (L x W)	71 x 43 inches / 180 x 109 cm
Standard Frame Colors	Experience Titanium
Standard Upholstery Colors	Black
Standard Shroud Color	Translucent
Optional Upholstery Colors	Mahogany Imperial Blue Paprika Royal Blue American Beauty Graphite Terra Cotta Slate

Equipment Dimensions and Weight

Length	64 inches / 163 cm
Width	43 inches / 109 cm
Height	57 inches / 145 cm
Equipment Weight	530 lbs / 240 kg

Shipping Dimensions and Weight

Length	66 inches / 167 cm
Width	42 inches / 106 cm
Height	36 inches / 91 cm
Shipping Weight	550 lbs / 249 kg

Regulatory

EN957 / ASTM	EN957
ASTM	Yes

Manufacturer reserves the right to change or alter specifications at any time. Precor protects its product by vigorously enforcing its patent, trademark, copyright and other applicable intellectual property rights in the USA and in other countries. Precor is a registered trademark of Precor Incorporated.

Warranty

FRAME:10 years, PARTS (MECHANICAL):5 years, WEAR ITEMS:6 months, OTHER (INCLUDING HAND GRIPS, END CAPS, CABLES, SELECTOR PINS, SHROUDS):1 year, LABOR:1 year

Reviews

Write Your Own Review

Leasing Options

We can custom tailor a leasing package to fit your space, budget, and time table.

Learn More

Warranty Plans

Our Product Protection Plan offers you more protection through extended coverage periods at an affordable cost.